![3d systems 3dsystem](https://3dmonotech.in/wp-content/uploads/2021/06/3d-systems-300x75.png)
FIGURE 4 STANDALONE – ULTRA-FAST AND AFFORDABLE FOR SAME DAY PROTOTYPING AND LOW-VOLUME PRODUCTION
DLP 3D Printer
Affordability
Part of 3D Systems’ scalable, fully integrated Figure 4® technology platform, Figure 4 Standalone is an affordable and versatile solution for low volume production, and same-day prototyping for fast design iteration and verification, offering speed, quality, and accuracy with industrial-grade durability, service, and support. With a compact and easy-to-use design, Figure 4 Standalone delivers industrial-grade durability at an affordable price and low total cost of operations.
![3D Printer FIGURE 4 STANDALONE 3D Printer](https://3dmonotech.in/wp-content/uploads/2021/07/fig4-1-264x300.png)
![3D Printer Chennai FIGURE 4 STANDALONE 3D Printer](https://3dmonotech.in/wp-content/uploads/2021/07/fig4-2-264x300.png)
Production-grade, rigid material for production parts
Versatility
Quick and easy material changeover allows for functional prototyping and production application diversity with the same printer. Featuring a manual material feed, it is augmented with separate post-processing units available for cleaning, drying, and curing.
Fast Turnaround
Achieve same-day functional prototyping and low volume production with ultra-high speeds. Figure 4 Standalone offers quality, accuracy, and Six Sigma repeatability (Cpk > 2) with industrial-grade durability, service, and support. Figure 4 Standalone was designed for ease-of-use and includes file preparation and print management with 3D Systems 3D Sprint software.
![3D Printer Chennai FIGURE 4 STANDALONE 3D Printer](https://3dmonotech.in/wp-content/uploads/2021/07/fig-4-3-300x286.png)
![3D Printer Chennai FIGURE 4 STANDALONE 3D Printer](https://3dmonotech.in/wp-content/uploads/2021/07/fig-4-comp.png)
Rigid, translucent material that can be sterilized and tested at high temperature
Broad Range of Materials
3D Systems’ Material Design Center has over 30 years of proven R&D experience and process development expertise. The broad and expanding range of materials available for Figure 4 Standalone addresses a wide variety of applications needs, for functional prototyping, direct production of end-use parts, molding and casting, and includes rigid and durable with thermoplastic-like behaviors, rubber-like, castable, heat resistant, and biocompatible capable materials.
Affordable and versatile
Affordable and versatile for low-volume production and fast prototyping, offering quality and accuracy with industrial-grade durability, service and support.
Prototyping to production
Same day prototyping and direct digital production of tens and hundreds of parts per month.
![Figure 4 Standalone Figure 4 Standalone](https://3dmonotech.in/wp-content/uploads/2021/12/Figure-4-Standalone1.png)
About Figure 4 Standalone 3D Printer
Applications
- Replacement of traditional molding and cast urethane processes
- Rapid functional prototyping and fast concept models
- Investment casting patterns for jewelry
- End-use durable plastic parts
- Short run production of plastic articles
- Jigs and fixtures
- Rapid tooling -molds and master patterns
- Elastomeric parts –prototypes of grommets, seals, hoses, weatherstripping, tubes, gaskets, spacers and other vibration dampening components
- Medical applications requiring biocompatibility and/or thermal resistance
Benefits
- Affordable initial investment
- High throughput vs. competitive 3D printing technologies
- Industrial-grade durability
- Print and use same day
- Low total cost of operations
- Application flexibility
- Efficient design iteration
- Six Sigma quality and repeatability
Tech Specs
- Non-contact membrane Figure 4 technology
- Printable Build Volume (W x D x H):124.8 x 70.2 x 196 mm (4.9 x 2.8 x 7.7 in)
- Industry-leading 3D Sprint software for file preparation and production
- Cloud connectivity for predictive and prompt service with 3D Connect capability.
- Production-grade materials
- Compact printer footprint
- Manual material feed
- Separate, manual post-curing unit, required
Technical Specifications
PRINTER HARDWARE
Build Volume (xyz) | 124.8 x 70.2 x 196 mm (4.9 x 2.8 x 7.7 in) |
Resolution | 1920 x 1080 pixel |
Pixel Pitch | 65 microns (0.0025 in) (390.8 effective PPI) |
Wavelength | 405 nm |
Operating Environment Temperature Humidity (RH) | 18-28 ºC (64-82 ºF) 20-80% |
Electrical | 100-240 VAC, 50/60 Hz, Single Phase, 4.0A |
Dimensions (WxDxH) 3D Printer crated Pedestal crated 3D Printer uncrated 3D Printer + Pedestal uncrated |
73.66 x 68.58 x 129.54 cm (29 x 27 x 51 in) 82.55 x 79.375 x 55.245 cm (32.5 x 31.25 x 21.75 in) 42.6 x 48.9 x 97.1 cm (16.7 x 19.25 x 38.22 in) 68.1 x 70.4 x 135.6 cm (26.8 x 27.71 x 53.38 in) |
Weight 3D Printer crated Pedestal crated 3D Printer uncrated 3D Printer + Pedestal uncrated |
59 kg (130 lbs) 26.3 kg (58 lbs) 34.5 kg (76 lbs) 54.4 kg (120 lbs) |
Certifications | FCC, CE, EMC |
PRINTER HARDWARE
Post-Processing | Includes part finishing tools accessory kit; Requires optional 3D Systems LC-3DPrint Box UV post-curing unit or other UV-curing unit |
LC-3DPrint Box | Load capacity (WxDxH): 260 x 260 x 195 mm Dimensions (WxDxH): 41 x 44 x 38 cm Full light spectrum: 300-550 nm Controlled temperature for optimal curing Weight (uncrated): 22 kg Electrical: 110V/230V, 50/60 Hz, 2.6A/1.3A |
LC-3DMixer (for mixing materials, purchase separately) |
Dimensions (WxDxH): 410 x 270 x 100 mm Weight (uncrated): 4 kg Electrical: 100-240 V, 50/60 Hz |
MATERIALS
Build Materials | See material selector guide and individual material datasheets for specifications on available materials. |
Material Packaging | 1kg bottles for manual pour |
SOFTWARE AND NETWORK
3D Sprint® Software | Easy build job set-up, submission and job queue management; Automatic part placement and build optimization tools; Part nesting capability; part editing tools; Automatic support generation; Job statistics |
3D Connect™ Software Capable | 3D Connect Service provides a secure cloud based connection to 3D Systems service teams for proactive and preventative support. |
Connectivity | 0/100/1000 Ethernet Interface |
Client Hardware Recommendation |
|
Client Operating System | Windows® 7 and newer (64-bit OS) |
Input File Formats Supported | STL, CTL, OBJ, PLY, ZPR, ZBD, AMF, WRL, 3DS, FBX, IGES, IGS, STEP, STP and X_T |